Tekdis Products
Industrial Networking
Model Code: IWF 3432XR
- Industrial High Density Access Point Tple RF, 2 x 802.11ac +1 802.11 a/b/g/n 3 x 3 MIMO
Model Code: IWF 3310XH/XM
- EN50155 Compliant 802.11a/b/g/n 2x2 MIMO AP/CPE
- Fast roaming (hand-over switch time less than 20 ms)
- Compliant with IEEE 802.11a/b/g/n 2x2 MIMO
Model Code: IPES-5416T-8-X
- Optional 12V input boost to 48V output for IEEE802.3at/af max.80W
- Support PTPv2 <1us, relay contact & environmental monitoring
- Optional 72V input steps down to 48V output for IEEE 802.3at/af max.80W
Model Code: IPGS-5008T-X
- EN50155/61373/45545-2 certified; 24~110V (WV) input selection
- IEEE802.3at/af up to 15W per port; PoE management incl. detection and scheduling
- IP 67 / IP54 Aluminum housing for best heat dissipation and preventing moist ingress
Model Code: IES-5208DF
- EN50155/61373/45545-2 certified; Optional 72V / 110V input voltage
- IEEE802.3at/af up to 30W per port; PoE management incl. detection and scheduling
- Support PTPv2 <1us, relay contact & environmental monitoring
Model Code: IES-0008B
- EN50155/50121-3-2/50121-4 and EN45545-2 R24/R25 Fire & Smoke certificate
- E-mark certificate for vehicle
- Provides M12 connector with IP41 rated protection
Model Code: IES-0005B
- EN50155/50121-3-2/50121-4 and EN45545-2 R24/R25 Fire & Smoke certificate
- E-mark certificate for vehicle
- Provides M12 connector with IP41 rated protection
Model Code: IPES-0008A
- EN50155/ E-Mark certificate
- Provides M12 connector with IP67 / 43 rated protection
- IEEE802.3at/af up to 30W PoE output
Model Code: IES-0008A
- EN50155/ E-Mark certificate
- Provides M12 connector with IP67 / 43 rated protection
- Wide Operating Temperature from -40°C to 75°C
Model Code: IPES-5408S-X
- Support PTPv2 one-step transparent clock @ 4 10/100/1000T ports
- EN50155/61373/45545-2 verification*; Compact size
- IEEE802.3at/af up to 30W per port; PoE management incl. detection and scheduling
Model Code: IES-2208CA
- UL Class I Division II for Group A,B,C and D certified
- ATEX Directive 94/9/EC certified (-ATEX model)
- Pro-Ring2se for self-heal ring <20ms
Model Code: IES-2008B
- UL Class I Division II for Group A,B,C and D certified
- ATEX Directive 94/9/EC certified (-ATEX model)
- Pro-Ring2se for self-heal ring <20ms
Model Code: IGC-0101GB
- UL Class I Division II for Group A,B,C and D hazardous location
- Built-in LLF & LFP technology
- Wide-range redundant power with polarity reverse protection
Model Code: IGC-0101GB
- UL Class I Division II for Group A,B,C and D hazardous location
- Built-in LLF & LFP technology
- Wide-range redundant power with polarity reverse protection
Model Code: IES-0008T
- UL Class I Division II for Group A,B,C and D hazardous location
- Wide-range redundant power with polarity reverse protection
- DNV Type Approved for Ships, Craft and Off-shore Platforms
Model Code: IES-0005T
- UL Class I Division II for Group A,B,C and D hazardous location
- Wide-range redundant power with polarity reverse protection
- DNV Type Approved for Ships, Craft and Off-shore Platforms
Model Code: IPGS-3416DSFPM
- Support IEEE802.3at/af up to 30W per port
- PoE management incl. Detection and Scheduling
- Enhanced G.8032 ring protection < 20ms with easy configuration; Dynamic coupling ring; Aggregation ring*
Model Code: IPGS-2204DSFP
- Pro-Ring IIse for single ring self-recovery ring in 20ms
- Support PoE Plus 802.3at/af ;120W PoE budget;9.5~56V PoE input (12V model)
- PoE management incl. Detection, Delay and Scheduling
Model Code: IPES-3208CB-4
- Support 4 x passive PoE Mode B
- PoE management incl. Detection and Scheduling
- Single G.8032 ring protection < 20ms with auto configuration
Model Code: IGS-0204DSFP
- 12V to 48V dual input
- Relay contact to connect with alarm system
- Wide operating temperature range from -40°C to 75°C
Model Code: IGS-0008T
- Supports 9720bytes jumbo frame
- Wide-range redundant power with polarity reverse protection
- Provides ESD/ EFT protection
Model Code: IES-0208CA
- Input voltage 12V~48V, Redundant power input
- Relay Alarm Output System Events
- -40°C~75°C (-E) Extended Operation Temperature
Model Code: IES-0204DFT
- 12V to 48V dual input
- Relay contact to connect with alarm system
- Wide operating temperature range from -40°C to 75°C
Model Code: IES-0008T
- UL Class I Division II for Group A,B,C and D hazardous location
- Wide-range redundant power with polarity reverse protection
- DNV Type Approved for Ships, Craft and Off-shore Platforms
Model Code: IES-0005T
- UL Class I Division II for Group A,B,C and D hazardous location
- Wide-range redundant power with polarity reverse protection
- DNV Type Approved for Ships, Craft and Off-shore Platforms
Model Code: IDS-2204
- Redundant Dual Ethernet Ports: Recovery time < 10ms
- Switch Mode Supported
- NAT-pass through
Model Code: IDS-2102
- Dual power Inputs by 12~48VDC
- HTTPS and SSH function ensure security
- Event warning by Syslog, E-mail, SNMP Trap, and Beeper
