Tekdis Products

PEAK 887VL2

Category: PICMG1.3

Downloads

CPU Support

4th generation Intel® Core™ i7/i5/i3 processor (95W/ 65W/ 45W/ 35W) TDPs, Socket LGA 1150

Main Memory

2 x DIMM, support Dual channel DDR3L (default)/ DDR3 NON-ECC DIMM (dual voltage models by auto detection for DDR3 and DDR3L Maximum 16 GB – 1066/1333/1600 MT/S

Platform Control Hub

Intel® Q87 Express Chipset PCH

BIOS

AMI system BIOS 16MBit SPI depended on AMT function Dual BIOS for Four PCIex1 and One PCIex4 auto-detection

Display

The Processor Graphics contains a refresh of the seventh generation graphics Intel® HD Graphics GT1 / GT2 Share system memory Analog Display Support Drive a standard progressive scan analog monitor

Audio

Reverse HDA interface, 2.0mm 2x5 pin header

On-board LAN

1x Intel® I217LM GbE PHY 

1x Intel® I211 Gigabit Ethernet Controller RJ45 with LED connecter

2 Support Boot From LAN (PXE) RJ45 LED Support Wake on LAN Extra (External) LED: 2 x 4 pin header

I/O Interface

ITE8783 PS2 KB/MS reserve 1x6 (2.0m) JST connector 26-pin Box Header x 1

(2.0mm) SIO Box Header x 4 (2.0mm),

COM1,3,4 support RS232, COM2 RS232/422/485, RI pin can be select RI/5V/12V with jumper (2x3 pin 2.0mm pin-header) 4 Ports USB 2.0 and 4 ports USB 3.0:
2 ports through 2.5mm JST Connectors, located near Rear Side of PCB (near CPU, USB3.0)
4 ports through
backplane (USB 2.0)
2 ports through I/O bracket (USB 3.0)

4-pin FAN connector x 2 (for CPU,System)

On board pin header for IrDA Tx Rx 1x5/2.54mm pin-header HDD LED/ Power LED/ Power ON SW/ Reset SW On Board buzzer USBx1/ USBx1/ LAN1 RJ45 x1/ LAN2 RJ45 x1/ VGA DB15 from top to down

Power Requirements

Power source from Backplane through Golden Finger and AUX +12V Support ATX/AT function by jumper setting BIOS default is (ATX MODE)

Dimensions

338.58mm x 126.39mm, 8 layers (single side)

Environment

Board Level Operating temperatures: -15°C to 60°C                    

Certifications

CE approval FCC Class A CB/CCC certification

Ask about this product

Comments