Tekdis Products


Category: PICMG1.3


CPU Support

Support Intel® LGA775 Core™ 2 Quad, Core™ 2 Duo, Pentium® D/ Celeron® processors with 800/1066/1333 MHz Intel® Embedded Processor List (Intel® Longevity CPU):

Intel® Core™ 2 Quad Processor (Q9400)

Intel® Core™ 2 Duo Processor (E8400 & E7400 & E6400 & E4300)

Intel® Pentium® Dual Core Processor (E2160)

Intel® Celeron® Processor 440

Main Memory

2 x 240-pin DIMM, for up to 4GB dual channel Non-ECC DDR3 800/1066 SDRAM


Intel® Q45 Graphic Controller Hub (GMCH) Intel® ICH10 DO


Award system BIOS Plug & Play support Advanced Power Management and Advanced Configuration & Power Interface support

On-board LAN

2 x Intel® 82574L PCI Express Gigabit Ethernet Controllers Support Boot From LAN (PXE) 2 x RJ45 with LED


Intel® Q45 GMCH Integrated Intel® GMA4500, Max 128 MB of DVMT for Graphics Memory Allocation Analog display support up to 2048x1536 @ 75Hz for CRT


HD Audio Codec, Realtek ALC888 3 x (1x4-pin) headers for Line-in/Line-out/MIC-in

I/O Interfaces

USB 2.0: 8 ports (4 on board, 4 to backplane)

Serial port: 2 port, with 2x5pin headers (COM 1 and COM 2)

SATA HDD: 6 ports, Support RAID 0/1/5/10 and Intel® Matrix Storage Technology (Intel® MST) (4 on board, 2 to backplane)

Parallel port: 1 x 26-pin connector

Floppy: 1 x 34-pin connector

IrDA: 1 x 5-pin header

GPIO: Supports 4 sets general purpose I/O each with TTL level (5V) interface On-board buzzer x 1

Power LED/Power On/ Reset/ SMBUS HDD Active LED/

PC speaker: 2 x 8 pin header 5-pin for key lock 1 x 4-pin fan connector (for CPU); 2 x 3-pin fan connectors (for System) IPMB interface through PICMG 1.3 Golden-finger I/O On SBC Bracket
1 x VGA DB-15 connector
2 x RJ45 Gigabit Ethernet LAN port
1 x PS/2

Watchdog Timer

1-minute increments from 1 to 255 minutes 1-second increments from 1 to 255 seconds On-chip RTC with battery backup 1 x External Li-lon battery

System Monitor

4 Voltages (+3.3V, +5V, +12V, Vcore) 2 Temperatures (For CPU and System) 3 FAN speed monitors (1 for CPU and 2 for System FAN)


PICMG 1.3 SHB Dimension: 338.58mm (L) x 126.39mm (W) (13.3" x 4.9")

Power Input

Power source from backplane through golden finger Support ATX power supplies +12V/+5V/+3.3V/+5Vsb


Board level operating temperatures: -15°C to 60°C                    


CE approval FCC Class A

Ask about this product

Captcha Image Reload image challenge