Tekdis Products

IVT1100


Downloads

General

Cooling System: Fanless Enclosure: Metal with aluminum die casting

heatsink Mounting: Double DIN Three fakra type antenna connectors of WWAN/Radio/GPS

Two SMA female type antenna connector of Wi-Fi 3-axis accelerometer G-sensor

Power Input: 9 ~ 36VDC input with Ignition Power Consumption: TBD

Dimension: 178mm (W) x 100mm (H) x 187.15mm (D)(7" x 3.9" x 6.4") Weight: TBD

LCD Panel

6.95-inch TFT LCD Panel with LED Backlight

800 x 480 pixels (WVGA) Brightness: 450 cd/m² (typical)

Contrast ratio: 500:1 (typical)

Touch Screen Sensor

4-wire resistant touch Anti-glare coating surface Transmission rate: 78 ± 3%

CPU & Chipset

Intel® Atom™ Dual Core E3825 1.33GHz

Memory

One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB) Default 2GB

Expandable Storage

1 x SATAIII mSATA Slot (available option 16G and 32G)

Expansion

1 x Half mini-PCIe socket (PCIe + USB) for WLAN and BT

option 1 x mini-PCIe socket ((USB + UART) for WWAN option)

I/O Interface-Front

1 x power button (with LED) 2 x volume button (with LED) 1 x mute,

2 x auto scan for FM (with LED, forward, back)

1 x Quick Manu button (with LED) Light Sensor Internal Mic-in

1 x Micro SD socket

1 x Reset button

I/O Interface-Rear

3 connectors with lock for

1 x power/ignition input

1 x eCall event button (only for uBlox 3G module)

1 x CAN Bus 2.0B

4 x CVBS Video-In (for rear/side camera, AV input)

4 x 20W audio ouput. Front right, front left, rear right and rear left

1 x Line-in

1 x VGA 1 x Fuse 15A 2 x USB 3.0

Communication Module

1 x On board GPS module 1 x WLAN or Bluetooth module for

optional 1 x WWAN module

Power Management

Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable Support S3 and S4 suspend mode; wake on RTC and SMS

Operating System

Windows 8 Professional, WES8 Windows 7, WES7 Linux Tizen (kernel V3.2.0)

Environment

Operating temperatures: Ambient with air -20°C to 50°C

Storage temperatures: -30°C to 80°C

Relative humidity: 10% to 95% (non-condensing)

Vibration (random): 2g @5 ~ 500Hz Vibration

Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4

Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 Shock

Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g

Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

Power Design & Protection

Load dump and inductive load protection Cold cranking protection Transient voltage protection Electrostatic discharge protection

Standards/Certifications

EMC

CE, FCC class B Power

SAE J1113

SAE J1455

ISO 7637-2 Safety

EN 60950-1 LVD

Ask about this product

Comments