Tekdis Products

VMC1100 7" ATOM


Downloads

General

Cooling System: Fanless Enclosure: Plastic PC + ABS with aluminum die casting heatsink

Mounting: Support VESA 75, stand mounting Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS

Power Input: 9 ~ 36VDC input with Ignition

Power Consumption: 26W

Ingress Protection: Front panel IP54 Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")

Weight: TBD

LCD Panel

7-inch TFT LCD Panel with LED Backlight 800 x 480 pixels (WVGA)

Brightness: 400 cd/m² (typical)

Contrast ratio: 600:1 (typical)

Touch Screen Sensor

4-wire resistant touch Anti-glare coating surface Transmission rate: 78 ± 3%

CPU & Chipset

Intel® Atom™ Dual Core E3825 1.33GHz

Memory

One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)
- Default 2GB

Expandable Storage

1 x SATAIII SATA DOM Slot (available option 16G and 32G)

Expansion

1 x Half mini-PCIe socket (PCIe + USB) for WLAN option

1 x mini-PCIe socket ((USB + UART) for WWAN option)

1 x External module for OBD/Battery module option(UART + USB)

I/O Interface-Front

F1 ~ F5 functions key Light Sensor Internal Mic-in

2 x Built-in 2W speakers

3 x LED indicators (Power mode, Storage and WWAN status)

I/O Interface-Lateral

Right side
- 1 x Micro SD card socket
- 1 x SIM card socket
- 1 x USB 3.0 host type A connector
- 1 x Mic-in, Line-out
Left side
- 1 x Power button
- 1 x System reset button
- Volume up/down or Brightness up/dow

I/O Interface-Rear

1 x 5-pin Circular connector for Power/Ignition input

1 x RJ45 for LAN

1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A) 1 x DB9 (Male) for
- RX/TX or RS-485
- 2 x CAN Bus 2.0
1 x DB15 (Female) for
- GPS dead reckoning interface (optional)
- 2 x PWM, 2 x Analog Input, 3 x GPO, 3 x GPI
Analog Input requirement for Voltages are measured
Channel: 8
Voltage range: 0 ~ 38V
Resolution: 8 bit
Analog Input requirement for Frequency, Speed
Square wave
Frequency signal offset voltage range: 0 ~ 15VDC
Protection: +/- 500V spike
Frequency signal duty cycle range: 10% ~ 90%

Communication Module

1 x On board GPS module

1 x WLAN or Bluetooth module for optional

1 x WWAN module for optional

Power Management

Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable Support S3 and S4 suspend mode; wake on RTC and SMS

Operating System

Windows 8 Professional, WES8 Windows 7, WES7 Linux Fedora (kernel V3.2.0)

Environment

Operating temperatures: Ambient with air -20°C to 60°C

Storage temperatures: -30°C to 80°C

Relative humidity: 10% to 95% (non-condensing)

Vibration (random): 3g @5 ~ 500Hz Vibration
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
Shock
Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

Power Design & Protection

Load dump and inductive load protection Cold cranking protection Transient voltage protection Electrostatic discharge protection

Standards/Certifications

EMC
- CE, FCC class B
Power
- SAE J1113
- SAE J1455
- ISO 7637-2
Safety
- EN 60950-1 LVD

Ask about this product

Comments