Tekdis Products

VTC7100-D1K

Category: Atom/Celeron Based

Downloads

CPU

Intel® Atom™ D2550 1.86GHz

Main Chipset

ICH10R

Memory

One 204-pin DDR3 1066MHz SO-DIMM slot (up to 4GB)

Expansion

1 x Mini-PCIe socket (PCIe + USB) for WLAN option

1 x Mini-PCIe socket (USB) for WWAN option

1 x Bluetooth module for option

1 x on board uBlox NEO-6Q GPS module or optional GPS with dead reckoning

I/O Interface-Front

1 x Line-out

1 x Mic-in (for WWAN CM8000 voice communication)

2 x SIM card socket (selectable)

1 x System reset button

1 x USB 2.0 host type A connector

1 x Power button

1 x CFast with protection cover

1 x Accessible 2.5" SATA II SSD tray

2 x DB9 isolation RS-422/ 485, Isolation: 5K Vrms 3 x DB9 isolation RS-232, Isolation: 5K Vrms

4 x LED’s for power, storage, WLAN/ WWAN and GPIO G sensor

I/O Interface-Rear

1 x 9~36VDC input with Ignition

1 x 12V/4A DC output, SMBus

1 x DB26 LVDS interface with 12V and USB2.0

1 x DB9 RS-232 (default) or OBDII (option)

1 x DB9 RS-422/ 485 1 x DB9 female connector for 4 x DI and 4 x DO
(Digital Input)
    Input Voltage (Internal Type): 5VDC TTL (default)
    Input Voltage (Source Type): 0~30 VDC
(Digital Output)
    Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
    Digital Output (Source Type): 0~30VDC, max current: 250mA 10-Pin terminal block for 8 x DI and 8 x DO
Isolation: 5K Vrms
(Isolated Digital Input)
    Input Voltage (Internal Type): 5VDC TTL (default)
    Input Voltage (Source Type): 0~30 VDC
(Isolated Digital Output)
    Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
    Digital Output (Source Type): 0~30VDC, max current: 250mA 5-Pin terminal block for 3x analog input
Isolation: 2K Vrms
2 x isolated analog voltage input 12VDC (Max.)
1 x isolated analog current input 10A (Max.)

2 x USB 2.0 host type A connector

2 x RJ45 with LEDs for 10/ 100/ 1000Mbps Ethernet

1 x Line-out

1 x Mic-in

Power Management

Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level on/off delay time by software Status of ignition and low voltage status can be detected by software Support S3/ S4 suspend mode

Operating System

WES 7 Win7 Pro for Embedded Linux 2.6 WES 2009

Dimensions

260mm (W) x 176mm (D) x 73.6mm (H) (10.24"x 6.93"x 2.9") 4 Kg (7.47 Lb)

Construction

Aluminum enclosure with fanless design

Environment

Operating temperatures:

Ambient with air: -30°C to 55°C

Standards/ Certifications

CE approval FCC Class A e13 Mark

Ask about this product

Comments