SSD452P 2.5" SATA SSD with IPS
The SSD452P from Transcend comes with a SATA III 6Gb/s interface and cutting edge 3D NAND technology that allows 96 layers of 3D NAND flash chips to be vertically stacked. This density breakthrough considerably improves storage efficiency compared to 3D NAND at 64 layers, and its built-in DRAM cache enables faster access.
The SSD452P from Transcend comes with a SATA III 6Gb/s interface and cutting edge 3D NAND technology that allows 96 layers of 3D NAND flash chips to be vertically stacked. This density breakthrough considerably improves storage efficiency compared to 3D NAND at 64 layers, and its built-in DRAM cache enables faster access.
The SSD452P, which uses Corner Bond technology, has been thoroughly tested in house and has a 3K Program/Erase cycle endurance rating as well as an extended operating temperature range of -20°C to 75°C. Data integrity in mission-critical applications is further ensured by the built-in Intelligent Power Shield (IPS).
The SSD452P-I from Transcend also has a wide temperature range (-40°C to 85°C) to ensure long-term functioning, increased endurance, and maximum reliability in mission-critical applications.
Hardware Features:
- DDR3 DRAM Cache embedded
- Key components fortified by default with Corner Bond technology
- Supports Transcend Scope Pro software
- Intelligent Power Shield (IPS) to prevent data loss in the event of sudden power outage
- Extended Temp. (-20°C ~ 75°C) and Wide Temp. (-40°C ~ 85°C) options available
Software Features:
- Dynamic thermal throttling
- Advanced Garbage Collection
- Advanced Global Wear-Leveling and Block management for reliability
- Power-saving DevSleep (Device Sleep) mode
- Built-in LDPC ECC (Error Correction Code) functionality
Appearance |
|
Dimensions |
100 mm x 69.85 mm x 6.8 mm (3.94" x 2.75" x 0.27") |
|---|---|
Weight |
54 g (1.90 oz) |
Form Factor |
|
Interface |
|
| Bus Interface |
|
Storage |
|
| Flash Type |
|
| Capacity |
|
Operating Environment |
|
| Operating Voltage |
|
| Operating Temperature |
|
| Storage Temperature | -55°C (-67°F) ~ 85°C (185°F) |
| Humidity | 5% ~ 95% |
| Shock |
|
| Vibration (Operating) | 20 G (peak-to-peak), 7 Hz ~ 2000 Hz (frequency) |
Power |
|
| Power Consumption (Operation) | 3.5 watt(s) |
| Power Consumption (Sleep) | 0.5 watt(s) |
Performance |
|
| Sequential Read/Write (CrystalDiskMark) | Read: up to 560 MB/s Write: up to 520 MB/s |
| 4K Random Read/Write (IOmeter) | Read: up to 90,000 IOPS Write: up to 85,000 IOPS |
| Mean Time Between Failures (MTBF) | 3,000,000 hour(s) |
| Terabytes Written (TBW) | up to 3,520 TBW |
| Drive Writes Per Day (DWPD) | 1.61 (3 yrs) |
| Note |
|
Warranty |
|
| Certificate |
|
