IES-3062GT - 8 port managed switch
6x10/100Base-T(X) and 2x10/100Base-T(X), 100Base-FX, 1000Base-T, 1000Base-SX or 1000Base-LX ports with wide operating temperature range from -40°C to 70°C.
- Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
- Open-Ring supports the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- STP/RSTP:2004/MSTP supported
- Support PTP Client (Precision Time Protocol) clock synchronization
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Port Trunking for easy of bandwidth management
- Support IPV6 new internet protocol version
- Provided HTTPS/SSH protocol to enhance network security
- Support TACACS+ and 802.1x User Authentication for security
*NOTE: This function is available by request only
Physical Ports | |
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 |
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 6 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table | 8192 MAC addresses |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switch Properties |
Switching latency : 7 μs |
Security Feature |
Enable/disable ports, MAC based port security |
Software Features |
STP/RSTP:2004/MSTP (IEEE 802.1D/w/s) |
Network Redundancy |
O-Ring |
Warning / Monitoring System |
Relay output for fault event alarming |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. Baud rate setting: 9600bps, 8, N, 1 |
LED Indicators | |
Power Indicator | Green : Power LED x 3 |
Fault Indicator | Amber : Indicates unexpected events occurred |
R.M. Indicator | Green : Indicates that the system is operating in O-Ring Master mode |
O-Ring Indicator | Green : Indicates that the system is operating in O-Ring mode |
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Duplex/Collision |
10/100/1000Base-T(X) RJ45 Port Indicator | Green for port Link / Act Amber for 100Mbps indicator |
Fault contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power | Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack |
Power Consumption (Typ.) | 8 Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present on terminal block |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.) |
Weight (g) | 722g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A |
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1, UL508(E331061) |
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 287,493 |
Warranty | 5 years |