IES-3082GC - EN50155, 10 port managed, SFP socket switch
8x10/100Base-T(X) ports and 2xGigabit combo ports with wide operating temperature range from -40°C to 70°C.
- Leading EN50155-compliant Ethernet switch for rolling stock application
- World’s fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
- Open-Ring support the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- STP/RSTP:2004/MSTP supported
- Support PTP Client (Precision Time Protocol) clock synchronization
- Support IPV6 new internet protocol version
- Provided HTTPS/SSH protocol to enhance network security
- Support TACACS+ and 802.1x User Authentication for security
*NOTE: This function is available by request only
Physical Ports | |
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 8 |
Gigabit Combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP port | 2 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table | 8192 MAC addressessses |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switch Properties |
Switching latency : 7 μs |
Security Features |
Enable/disable ports, MAC based port security |
Software Features |
STP/RSTP:2004/MSTP (IEEE 802.1D/w/s) |
Network Redundancy |
O-Ring |
Warning / Monitoring System |
Relay output for fault event alarming |
DDM Function | Voltage / Current / Temperature |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 |
LED Indicators | |
Power Indicator | Green : Power LED x 3 |
R.M. Indicator | Green : Indicates that the system is operating in O-Ring master mode |
O-Ring Indicator | Green : Indicates that the system is operating in O-Ring mode |
Fault Indicator | Amber : Indicates unexpected event occurred |
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Duplex/Collision |
10/100/1000Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for 100Mbps indicator |
100/1000Base-X / Fiber Port Indicator | Green for port Link/Act. |
Fault contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power | Dual DC inputs. 12~48VDC on 6-pin terminal block |
Power Consumption (Typ.) | 8.5 Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present on terminal block |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 74.3(W) x 109.2(D) x 153.6(H) mm (2.93x4.3x6.05 inch) |
Weight (g) | 1140g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN50121-4, EN55011) |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | 5 years |