IES-A3162GC - 18 port managed switch
16x10/100Base-T(X) ports and 2xgigabit combo ports with wide operating temperature range from -40 to 70°C.
- C1D2 and ATEX compliant for harsh industrial environments application
- World’s fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
- Open-Ringsupport the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- *note Supportstandard IEC 62439-2 MRP (Media Redundancy Protocol) function
- STP/RSTP:2004/MSTP supported
- Support IPv6 new internet protocol version
- Support PTP Client (Precision Time Protocol) clock synchronization
- Provided HTTPS/SSH protocol to enhance network security
- Support Modbus/TCP protocol
- IGMP v2/v3 (IGMP snooping for support) filtering multicast traffic
- Port Trunking for easy of bandwidth management
- SNMP V1/V2c/V3 support for secured network management
- RMON for traffic monitoring
- Support LLDP protocol
- Support TACACS+ and 802.1x User Authentication for security
- Event notification through Syslog, Email, SNMP trap, and Relay Output
- Port lock to prevent access from unauthorized MAC address
- Windows utility (Open-Vision) support centralized management and configurable by Web-based ,Telnet, Console (CLI)
- Support two Gigabit combo ports
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
*NOTE: This function is available by request only
Physical Ports | |
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX |
16 |
Gigabit combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP port |
2 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table | 8192 MAC addresses |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switch Properties |
Switching latency: 9 us |
Security Features |
Enable/disable ports, MAC based port security |
Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s) |
Network Redundancy |
O-Ring |
Warning / Monitoring System |
Relay output for fault event alarming |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 |
LED Indicators | |
Power Indicator | Green : Power LED x 3 |
R.M. Indicator | Green : Indicate system operated in O-Ring master mode |
O-Ring Indicator | Green : Indicate system operated in O-Ring mode |
Fault Iindicator | Amber : Indicate unexpected event occurred |
10/100Base-T(X) RJ45 port Indicator | Green for port Link/Act. Amber for Duplex/Collision |
10/100/1000Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for 100Mbps indicator |
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. |
Fault Contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power | Dual DC inputs. 12 ~ 48VDC on 6-pin terminal block |
Power Consumption (Typ.) | 12 Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present on terminal block |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 96.4(W)x108.5(D)x154(H) mm (3.8 x 4.27 x 6.06 inch) |
Weight (g) | 1220 g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMC | EN 55022, EN 55024(CE EMC), FCC, EN 61000-6-2, EN 61000-6-4,IEC 61000-3-2 ,IEC 61000-3-3 |
EMI | CISPR 22, EN 55011, FCC Part 15B Class A |
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC 60068-2-31 (IEC 60068-2-32) |
Vibration | IEC60068-2-6 |
Safety | EN60950-1, UL/cUL Class 1 Division 2 Group A/B/C/D, ATEX Class 1 Zone 2 |
Warranty | 5 years |