IGS-3032GC 5-port managed Gigabit Ethernet switch
Industrial 5-port managed Gigabit Ethernet switch with 3x10/100/1000Base-T(X) and 2xGigabit combo ports, SFP socket
- Designed for Railway application and full compliant with the requirement of EN50155 standard
- Fastest Redundant Ethernet Ring : O-Ring (recovery time < 20ms over 250 units of connection)
- Open-Ring supports the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- Support Modbus TCP protocol
- STP/RSTP:2004/MSTP supported
- Supports PTP Client (Precision Time Protocol) clock synchronization
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Port Trunking for easy of bandwidth management
- Support IPV6 new internet protocol version
- Provided HTTPS/SSH protocol to enhance network security
- Support TACACS+ and 802.1x User Authentication for security
*NOTE: This function is available by request only
Physical Ports | |
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX | 3 |
Gigabit Combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port | 2 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table | 8192 MAC addresses |
Priority Queues | 4 |
Processing | Store-and-Forward |
Jumbo Frame | Up to 9KBytes |
Switch Properties |
Switching latency : 7 μs |
Security Features |
Enable/disable ports, MAC based port security |
Software Features |
STP/RSTP:2004/MSTP (IEEE 802.1D/w/s) |
Network Redundancy |
O-Ring O-Chain |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 |
LED Indicators | |
Power Indicator | Green : Power LED x 3 |
R.M. Indicator | Green : Indicates that the system is operating in O-Ring Master mode |
Ring Indicator | Green : Indicates that the system is operating in O-Ring mode |
Fault Indicator | Amber : Indicates unexpected event occurred |
10/100/1000Base-T(X) RJ45 port Indicator | Green for port Link/Act. Amber for 100Mbps indicator |
100/1000Base-X SFP port Indicator | Green for port Link/Act. |
Fault Contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power | Triple DC inputs: +12 ~ +48VDC or -12 ~ -48VDC on 7-pin terminal block, 12 ~ 45VDC on power jack |
Power Consumption (Typ.) | 10 Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present on terminal block |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 54.1(W)x106.1(D)x145.4(H) mm (2.13x4.18x5.72inch.) |
Weight (g) | 820g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock | IEC60068-2-27 , EN61373 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 , EN61373 |
Safety | EN60950-1 |
Warranty | 5 years |