IGS-9122GPM - 15 port industrial switch
EN50155 modular managed Gigabit Ethernet switch with 12x10/100/1000Base-T(X) and 100/1000Base-X, SFP socket, 3 module extender slots
- Modular designed and Hot-swappable make network planning easier
- Support O-Ring (recovery time < 30ms over 250 units of Gigabit Ethernet and <10ms over 250 units of fast Ethernet) and MSTP (RSTP/STP compatible) for Ethernet Redundancy
- O-Chain allow multiple redundant network rings
- *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- Support IEEE 1588v2 clock Synchronization
- Support IPv6 new internet protocol version
- Support Modbus TCP protocol
- Provided HTTPS/SSH protocol to enhance network security
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Support NTP server protocol
- Support IP-based bandwidth management
- Support application-based QoS management
- Support Device Binding security function
- Support DOS/DDOS auto prevention
- IGMP v1/v2/v3 (IGMP snooping support) and GMRP for filtering multicast traffic
- Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support port mirror function to monitor port data
- Support ACL and 802.1x User Authentication for security
- Support 9.6K Bytes Jumbo Frame
- Support DBU-01 backup unit device to quickly backup/restore configuration
- Event notification through Syslog, Email, SNMP trap, and Relay Output
- Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Support LLDP Protocol
- Support dual power inputs for power redundancy
- Din-Rail enabled and fan-less design
- Modular designed and Hot-swappable make network planning easier
- Support O-Ring(recovery time < 30ms over 250 units of Gigabit Ethernet and <10ms over 250 units of fast Ethernet) andMSTP (RSTP/STP compatible) forEthernet Redundancy
- O-Chain allow multiple redundant network rings
- Supportstandard IEC 62439-2 MRP (Media Redundancy Protocol) function
- Support IEEE 1588v2 clock Synchronization
- Support IPv6 new internet protocol version
- Support Modbus TCP protocol
- Provided HTTPS/SSH protocol to enhance network security
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Support NTP server protocol
- Support IP-based bandwidth management
- Support application-based QoS management
- Support Device Binding security function
- Support DOS/DDOS auto prevention
- IGMP v1/v2/v3 (IGMP snooping support)and GMRP for filtering multicast traffic
- Support SNMPv1/v2c/v3 & RMON & 802.1QVLAN Network Management
- Support port mirror function to monitor port data
- Support ACL and 802.1x User Authentication for security
- Support 9.6K Bytes Jumbo Frame
- Support DBU-01 backup unit device to quickly backup/restore configuration
- Event notification through Syslog, Email, SNMP trap, and Relay Output
- Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Support LLDP Protocol
- Support dual power inputs for power redundancy
- Din-Rail enabled and fan-less design
*NOTE: This function is available by request only
Physical Ports | |
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX |
12 |
100/1000Base-X SFP Ports | 2 |
Module Slot Number | 3 (support 4x1G combo / 4x1G Fiber / 4x100Mbps Fiber module) |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table | 8k |
Priority Queues | 8 |
Processing | Store-and-Forward |
Switch Properties |
Switching latency: 7 us |
Jumbo Frame | Up to 9.6K Bytes |
Security Features |
Device Binding security feature |
Software Features |
IEEE 1588v2 clock synchronization |
Network Redundancy | O-Ring O-Chain *note MRP Fast Recovery MSTP (RSTP/STP compatible) |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 (support DBU-01 backup unit) |
LED Indicators | |
System Ready Indicator (PWR) | Green: Indicates that the system ready. The LED is blinking when the system is upgrading firmware. |
Power Indicator (PWR1 / PWR2) | Green: Power LED x 2 |
Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode |
O-Ring Indicator (Ring) |
Green: Indicates that the system operating in O-Ring mode |
Fault Indicator (Fault) | Amber: Indicate unexpected event occurred |
10/100/1000Base-T(X) RJ45 Port Indicator |
Green for Link/Act indicator. |
100/1000Base-X SFP Port Indicator | Green for Link/Act indicator |
Fault Contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant power input modular | Dual 12~48VDC power inputs at terminal block |
Power consumption (Typ.) | TBD |
Overload Current Protection | Present |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 184 (W) x 155 (D) x 150 (H) mm (7.24x6.1x5.9 inch) |
Weight (g) | TBD |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 75°C (-40 to 167°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A, EN50121-4, EN50155(pending) |
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | 5 years |