IPEC-0101FT - 1 port media converter with PoE injector

In stock

SKU:

IPEC-0101FT

- Built-in LFP & LLF technology
- Wide operating temperature range from -40°C to 75°C (-E model)
- Redundant power supply

Enquire Now

Name

Phone

Postcode

Message

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Features

_{IEEE Standards}	_{IEEE 802.3 10Base-T Ethernet} _{IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet} _{IEEE802.3x Flow Control and Back Pressure} _{IEEE 802.3af Power over Ethernet}
_{Link Lose Forward}	_{TX to Fiber: If TX port link down, the media converter will force Fiber port to link down} _{Fiber to TX: If Fiber port link down, the media converter will force TX port to link down}
_{PoE pin assignment}	_{RJ-45 port support IEEE 802.3af End-point, Alternative A mode.} _{Positive (VCC+): RJ-45 pin 1, 2.} _{Negative (VCC-): RJ-45 pin 3, 6. Data (1,2,3,6 )}
_{Switch Architecture}	_{Store-and –Forward} _{Packet throughput ability (Full-Duplex): 1.488Mpps @64bytes}
_{Transfer Rate}	_{14,880pps for Ethernet port} _{148,800pps for Fast Ethernet port}
_{MAC Address}	_{2K Mac address table}
_Connectors	_{SC (Multi-mode): 50/125um~62.5/125um} _{SC (Single-mode): 9/125um} _{Available distance: 2km (Multi-mode)/30km (Single-mode)} _{Wavelength: 1310nm (Multi-mode/Single-mode)} _{10/100TX: 1 x RJ-45 with auto MDI/MDI-X function} _{[Multi-Mode] power budget : Min: 9dB , MAX: 19dB.} _{[Single-Mode] power budget : Min: 19dB , MAX: 26dB.}
_{Network Cable}	_{10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable} _{EIA/TIA-568 100-ohm (100m)} _{100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable} _{EIA/TIA-568 100-ohm (100m)}
_Protocol	_CSMA/CD
_LED	_{Per unit: Power 1 (Green), Power 2 (Green), Fault(Red)} _{TX: Link/Active (Green), 100M(Yellow), Feeding Power (Green)} _{Fiber: Link/Active (Green), Full duplex/Collision (Yellow)}
_{DIP Switch}	_{DIP Switch 1: OFF: Disables Port /Power Alarm ON: Enables Port /Power Alarm} _{DIP Switch 2: OFF: Disables LLF (Link Loss Forwarding) & LFP (Link Fault Pass- Through) ON: Enables LLF (Link Lose Forwarding ) & LFP (Link Fault Pass-Through)} _{DIP Switch 3: OFF: 100Base-FX Full-mode ON: 100Base-FX Half-mode} _{DIP Switch 4: OFF: Switching mode ON: Media mode (100TX to 100FX)}
_{Power Supply}	_{48VDC (45~56VDC), Redundant power with removable terminal block}
_{Power Consumption}	_{2.6 Watts (Unload)} _{3.3 Watts (Full load: Only Ethernet)} _{15.7 Watts (Full load: Only PD load)} _{16.4 Watts (Full load)}
_{Overload current protection}	_Present
_{Operating Humidity}	_{5% ~ 95% (Non-condensing)}
_{Operating Temperature}	_{-20°C~60°C / -4°F~140°F (Standard model)} _{-40°C~75°C / -40°F~167°F (-E model)}
_{Storage Temperature}	_{-40°C~85°C / -40°F~185°F}
_{Case Dimension}	_{Metal case,IP-30; 30mm(W)x95mm(D)x140mm(H)}
_Weight	_{600 g}
_{EMI & EMS}	_{FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3(RS), CE EN-61000-4-4 (EFT),} _{CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11,} _{CE EN61000-6-2, CE EN61000-6-4}
_Safety	_CE/EN60950-1
_{Stability Testing}	_{IEC60068-2-32(Free fall),} _{IEC60068-2-27(Shock),} _{IEC60068-2-6(Vibration)}
_MTBF	_{391515 hrs}
_Warranty	_{5 years}

This product is listed in Ethernet Switches

Downloads

Product Data Sheet

IPEC-0101FT - 1 port media converter with PoE injector

IEEE Standards

IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet

Link Lose Forward

TX to Fiber: If TX port link down, the media converter will force Fiber port to link down Fiber to TX: If Fiber port link down, the media converter will force TX port to link down

PoE pin assignment

RJ-45 port support IEEE 802.3af End-point, Alternative A mode. Positive (VCC+): RJ-45 pin 1, 2. Negative (VCC-): RJ-45 pin 3, 6. Data (1,2,3,6 )

Switch Architecture

Store-and –Forward Packet throughput ability (Full-Duplex): 1.488Mpps @64bytes

Transfer Rate

14,880pps for Ethernet port 148,800pps for Fast Ethernet port

MAC Address

2K Mac address table

Connectors

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable EIA/TIA-568 100-ohm (100m)

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), Fault(Red)

TX: Link/Active (Green), 100M(Yellow), Feeding Power (Green)

Fiber: Link/Active (Green), Full duplex/Collision (Yellow)

DIP Switch

Power Supply

48VDC (45~56VDC), Redundant power with removable terminal block

Power Consumption

2.6 Watts (Unload) 3.3 Watts (Full load: Only Ethernet) 15.7 Watts (Full load: Only PD load) 16.4 Watts (Full load)

Overload current protection

Present

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-20°C~60°C / -4°F~140°F (Standard model)-40°C~75°C / -40°F~167°F (-E model)

Storage Temperature

-40°C~85°C / -40°F~185°F

Case Dimension

Metal case,IP-30; 30mm(W)x95mm(D)x140mm(H)

Weight

600 g

EMI & EMS

FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3(RS), CE EN-61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11, CE EN61000-6-2, CE EN61000-6-4

Safety

CE/EN60950-1

Stability Testing

IEC60068-2-32(Free fall), IEC60068-2-27(Shock), IEC60068-2-6(Vibration)

MTBF

391515 hrs

Warranty

5 years

_{IEEE Standards}

_{IEEE 802.3 10Base-T Ethernet}
_{IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet}
_{IEEE802.3x Flow Control and Back Pressure}
_{IEEE 802.3af Power over Ethernet}

_{Link Lose Forward}

_{TX to Fiber: If TX port link down, the media converter will force Fiber port to link down}
_{Fiber to TX: If Fiber port link down, the media converter will force TX port to link down}

_{PoE pin assignment}

_{RJ-45 port support IEEE 802.3af End-point, Alternative A mode.}
_{Positive (VCC+): RJ-45 pin 1, 2.}
_{Negative (VCC-): RJ-45 pin 3, 6. Data (1,2,3,6 )}

_{Switch Architecture}

_{Store-and –Forward}
_{Packet throughput ability (Full-Duplex): 1.488Mpps @64bytes}

_{Transfer Rate}

_{14,880pps for Ethernet port}
_{148,800pps for Fast Ethernet port}

_{MAC Address}

_{2K Mac address table}

_Connectors

_{Network Cable}

_{10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable}
_{EIA/TIA-568 100-ohm (100m)}
_{100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable}
_{EIA/TIA-568 100-ohm (100m)}

_Protocol

_CSMA/CD

_LED

_{Per unit: Power 1 (Green), Power 2 (Green), Fault(Red)}

_{TX: Link/Active (Green), 100M(Yellow), Feeding Power (Green)}

_{Fiber: Link/Active (Green), Full duplex/Collision (Yellow)}

_{DIP Switch}

_{Power Supply}

_{48VDC (45~56VDC), Redundant power with removable terminal block}

_{Power Consumption}

_{2.6 Watts (Unload)}
_{3.3 Watts (Full load: Only Ethernet)}
_{15.7 Watts (Full load: Only PD load)}
_{16.4 Watts (Full load)}

_{Overload current protection}

_Present

_{Operating Humidity}

_{5% ~ 95% (Non-condensing)}

_{Operating Temperature}

_{-20°C~60°C / -4°F~140°F (Standard model)}
_{-40°C~75°C / -40°F~167°F (-E model)}

_{Storage Temperature}

_{-40°C~85°C / -40°F~185°F}

_{Case Dimension}

_{Metal case,IP-30; 30mm(W)x95mm(D)x140mm(H)}

_Weight

_{600 g}

_{EMI & EMS}

_{FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3(RS), CE EN-61000-4-4 (EFT),}
_{CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11,}
_{CE EN61000-6-2, CE EN61000-6-4}

_Safety

_CE/EN60950-1

_{Stability Testing}

_{IEC60068-2-32(Free fall),}
_{IEC60068-2-27(Shock),}
_{IEC60068-2-6(Vibration)}

_MTBF

_{391515 hrs}

_Warranty

_{5 years}