IPGS-3208MGSFP - 10 port managed switch

In stock

SKU:

IPGS-3208MGSFP

- Multi-rate SFP cage support with 1.25G or 2.5G Mbps SFP
- Support IEEE802.3at/af up to 30W per port
- Enhanced G.8032 ring protection < 20ms with basic mode, enhanced mode, train mode** and auto** mode; Enhanced G.8032 ring covers multicast packets; MSTP 8MSTI/RSTP

Enquire Now

Name

Phone

Postcode

Message

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Features

_Standards	_{IEEE802.3 10Base-T Ethernet} _{IEEE802.3u 100Base-TX} _{IEEE802.3ab 1000Base-T Ethernet} _{IEEE802.3z Gigabit fiber} _{IEEE802.3x Flow Control and Back Pressure} _{IEEE802.3ad Port trunk with LACP} _{IEEE802.1d Spanning Tree} _{IEEE802.1w Rapid Spanning Tree} _{IEEE802.1s Multiple Spanning Tree} _{IEEE802.3ad Link Aggregation Control Protocol (LACP)} _{IEEE802.1AB Link Layer Discovery Protocol (LLDP)} _{IEEE802.1X User Authentication (Radius)} _{IEEE802.1p Class of Service} _{IEEE802.1Q VLAN Tag} _{IEEE802.3at/af Power over Ethernet}
_{Switch Architecture}	_{Back-plane (Switching Fabric): 26Gbps}
_{Transfer Rate}	_{14,880pps for Ethernet port} _{148,800pps for Fast Ethernet port} _{1,488,000pps for Gigabit Fiber / Gigabit Ethernet port}
_{Mac Address}	_{16K MAC address table}
_{Jumbo frame}	_{10KB on all ports}
_Connectors	_{10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function} _{SFP port: 2 x 2.5G/1.25G selectable cage by software with DDMI supported} _{RS-232 connector: RJ-45 type; USB x 1*} _{Power & P-Fail connector: 1 x 6-pole terminal block}
_{Network Cable}	_{10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable} _{EIA/TIA-568 100-ohm (100m)} _{100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable} _{EIA/TIA-568 100-ohm (100m)} _{1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable} _{EIA/TIA-568 100-ohm (100m)}
_{Optical Cable}	_1.25Gbps: _{Multi mode: 0 to 550 m, 850 nm (50/125 μm); 0 to 2 km, 1310 nm (50/125 μm)} _{Single mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm (9/125 μm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550 nm (9/125 μm)} _2.5Gbps _{Multi mode: 0 to 550 m, 850 nm (50/125 μm);} _{Single mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm (9/125 μm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550 nm (9/125 μm)} _{WDM 1.25Gbps:} _{Single mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310 nm (9/125 μm); 0 to 80 km, 1490 nm (9/125 μm); 0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm)} _{WDM 2.5Gbps} _{Single mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310 nm (9/125 μm); 0 to 80 km, 1490 nm (9/125 μm)} _{0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm)}
_Protocol	_CSMA/CD
_LED	_{Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red); RM(Green)} _{Ethernet port: Link/Activity (Green), Speed (Amber);} _{PoE : Link/Act (Green); Mini-GBIC: Link/Activity (Green)}
_{Operating Humidity}	_{5% ~ 95% (Non-condensing)}
_{Operating Temperature}	_{-20°C~60°C / -4°F~140°F (Standard model)} _{-40°C~75°C / -40°F~167°F(-E model)}
_{Storage Temperature}	_{-40°C~85°C / -40°F~185°F}
_{Power Supply}	_{44~57VDC(48V model); 9.5V~57VDC(12V model)}
_{PoE Budget}	_{240W for 44~57V input(48V model)} _{(54V input is recommended for 802.3at 30W applications)} _{80W at 12V input; 120W at 24V input(12V model)}
_{PoE pin assignment}	_{RJ-45 port # 1~#8 support IEEE 802.3at/af End-point,} _{Alternative A mode. Per port provides up to 30W} _{Positive (VCC+): RJ-45 pin 1,2.} _{Negative (VCC-): RJ-45 pin 3,6.}
_{Power Consumption}	_10W
_{Case Dimension}	_{IP-30, 74 (W) x 114 (D) x 152 (H) mm}
_Weight	_{900 g}
_Installation	_{DIN Rail and Wall Mount** Design}
_{EMI & EMS}	_{FCC Class A,} _{CE EN55022 Class A, CE EN55024, CE EN61000-4-2,} _{CE EN61000-4-3, CE EN61000-4-4,} _{CE EN61000-4-5 ED3, CE EN61000-4-6,} _{CE N61000-4-8, EN61000-4-11}
_{Stability Testing}	_{IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),} _{IEC60068-2-6 (Vibration)}
_MTBF	_NA
_Warranty	_{5 years}

This product is listed in Ethernet Switches

Downloads

Product Data Sheet

IPGS-3208MGSFP - 10 port managed switch

Standards

Switch Architecture

Back-plane (Switching Fabric): 26Gbps

Transfer Rate

14,880pps for Ethernet port 148,800pps for Fast Ethernet port 1,488,000pps for Gigabit Fiber / Gigabit Ethernet port

Mac Address

16K MAC address table

Jumbo frame

10KB on all ports

Connectors

10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function SFP port: 2 x 2.5G/1.25G selectable cage by software with DDMI supported RS-232 connector: RJ-45 type; USB x 1* Power & P-Fail connector: 1 x 6-pole terminal block

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m) 1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable EIA/TIA-568 100-ohm (100m)

Optical Cable

0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm)

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red); RM(Green) Ethernet port: Link/Activity (Green), Speed (Amber); PoE : Link/Act (Green); Mini-GBIC: Link/Activity (Green)

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-20°C~60°C / -4°F~140°F (Standard model)-40°C~75°C / -40°F~167°F(-E model)

Storage Temperature

-40°C~85°C / -40°F~185°F

Power Supply

44~57VDC(48V model); 9.5V~57VDC(12V model)

PoE Budget

240W for 44~57V input(48V model) (54V input is recommended for 802.3at 30W applications) 80W at 12V input; 120W at 24V input(12V model)

PoE pin assignment

RJ-45 port # 1~#8 support IEEE 802.3at/af End-point,

Alternative A mode. Per port provides up to 30W Positive (VCC+): RJ-45 pin 1,2. Negative (VCC-): RJ-45 pin 3,6.

Power Consumption

10W

Case Dimension

IP-30, 74 (W) x 114 (D) x 152 (H) mm

Weight

900 g

Installation

DIN Rail and Wall Mount** Design

EMI & EMS

FCC Class A, CE EN55022 Class A, CE EN55024, CE EN61000-4-2,

CE EN61000-4-3, CE EN61000-4-4,

CE EN61000-4-5 ED3, CE EN61000-4-6,

CE N61000-4-8, EN61000-4-11

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

MTBF

NA

Warranty

5 years

_Standards

_{Switch Architecture}

_{Back-plane (Switching Fabric): 26Gbps}

_{Transfer Rate}

_{14,880pps for Ethernet port}
_{148,800pps for Fast Ethernet port}
_{1,488,000pps for Gigabit Fiber / Gigabit Ethernet port}

_{Mac Address}

_{16K MAC address table}

_{Jumbo frame}

_{10KB on all ports}

_Connectors

_{10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function}
_{SFP port: 2 x 2.5G/1.25G selectable cage by software with DDMI supported}
_{RS-232 connector: RJ-45 type; USB x 1*}
_{Power & P-Fail connector: 1 x 6-pole terminal block}

_{Network Cable}

_{10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable}
_{EIA/TIA-568 100-ohm (100m)}
_{100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable}
_{EIA/TIA-568 100-ohm (100m)}
_{1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable}
_{EIA/TIA-568 100-ohm (100m)}

_{Optical Cable}

_{0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm)}

_Protocol

_CSMA/CD

_LED

_{Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red); RM(Green)}
_{Ethernet port: Link/Activity (Green), Speed (Amber);}
_{PoE : Link/Act (Green); Mini-GBIC: Link/Activity (Green)}

_{Operating Humidity}

_{5% ~ 95% (Non-condensing)}

_{Operating Temperature}

_{-20°C~60°C / -4°F~140°F (Standard model)}
_{-40°C~75°C / -40°F~167°F(-E model)}

_{Storage Temperature}

_{-40°C~85°C / -40°F~185°F}

_{Power Supply}

_{44~57VDC(48V model); 9.5V~57VDC(12V model)}

_{PoE Budget}

_{240W for 44~57V input(48V model)}
_{(54V input is recommended for 802.3at 30W applications)}
_{80W at 12V input; 120W at 24V input(12V model)}

_{PoE pin assignment}

_{RJ-45 port # 1~#8 support IEEE 802.3at/af End-point,}

_{Alternative A mode. Per port provides up to 30W}
_{Positive (VCC+): RJ-45 pin 1,2.}
_{Negative (VCC-): RJ-45 pin 3,6.}

_{Power Consumption}

_10W

_{Case Dimension}

_{IP-30, 74 (W) x 114 (D) x 152 (H) mm}

_Weight

_{900 g}

_Installation

_{DIN Rail and Wall Mount** Design}

_{EMI & EMS}

_{FCC Class A,}
_{CE EN55022 Class A, CE EN55024, CE EN61000-4-2,}

_{CE EN61000-4-3, CE EN61000-4-4,}

_{CE EN61000-4-5 ED3, CE EN61000-4-6,}

_{CE N61000-4-8, EN61000-4-11}

_{Stability Testing}

_{IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),}
_{IEC60068-2-6 (Vibration)}

_MTBF

_NA

_Warranty

_{5 years}