VTC6222-GCIoT - Google Cloud AI Edge In-Vehicle Solution
Intel AtomĀ® processor E3950 up to 2.0GHz CPU, 4GB DDR3L SODIMM, Google Edge TPU, DC input 9~48 VDC
· Built-in Google Edge TPU ML accelerator coprocessor
· Intel Atom® processor quad core E3950, up to 2.0GHz
· 4 x PoE (802.3af/at, max. 60W)
· Built-in u-blox-M8N GPS
· Built-in CAN Bus 2.0B
· Three video outputs, one VGA and two HDMI
· E Mark conformity
· 3 x mini-PCIe socket expansion
· Dual external storage (compatible with 15mm disk)
· 1 x USB DOM to run OS
· 1 x SD card for exporting and backing up data
CPU
ĀIntelAtomĀ® processor quad core E3950, up to 2.0GHz, 12W, 4 core
Memory
Ā1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB.
Default 4GB
Google Edge TPU (Coral ML Accelerator Card)
ĀHardware interface: mini-PCIe (half size)
ĀSerial interface: PCIe Gen2 x1
ĀPerformance: 4TOPS @2Watt
ĀOperating voltage: 3.3V +/- 10 %
ĀDimensions: 30mm x 26.8mm x 2.5 mm
Video Output
ĀChipset IntelĀ® HD graphics 505
Ā2 x HDMI 1.4b up to 4096 x 2160 @30Hz
Ā1 x VGA up to 1920 x 1200 @60Hz
Storage
Ā2 x 2.5" SSD/HDD SATA 3.0 (compatible with 15mm drive)
Ā1 x SD memory card 3.0 (externally accessible)
Ā1x USB EDC for USB DOM
Expansion
Ā1 x Full size mini-PCIe socket (USB 2.0), BOM optional M.2 Key B
(USB2.0 + USB 3.0) with 2 x external SIM
Ā1 x Full size mini-PCIe socket (USB 2.0 + PCIe 2.0)
Ā1 x Half size mini-PCIe socket (USB 2.0 + PCIe 2.0)
GNSS and On Board Sensor
Ā1 x Default U-blox NEO-M8N GNSS for GPS/Glonass/QZSS/Galileo/
Beidou
ĀG Sensor (3-axis, 10-bit resolution)
ĀTPM 2.0 (optional)
LAN and Power over Ethernet
Ā4-Port LAN, 10/100/1000 Mbps I210-IT GbE, PoE 802.3af/at, max. 60W
Ā1-Port LAN, 10/100/1000 Mbps I210-IT GbE
I/O Interface-Front
Ā12 x LED indicators (including 3 x programmable LED)
Ā2 x Externally accessible SIM card socket with cover
Ā2 x 2.5" removable SSD tray
Ā1 x Externally accessible SD card socket with cover
Ā1 x Reset button
Ā1 x Power button
Ā1 x USB 3.0 type A (5V/0.9A)
Ā2 x HDMI 1.4b
Ā1 x Mic-in, 1 x Line-out
I/O Interface-Rear
Ā1 x 3-pin terminal block for 9V~48V DC
Ā1 x RJ45 10/100/1000 Mbps
Ā4 x PoE 802.3af/at (max. 60W)
Ā1 x VGA
Ā1 x DB9 full RS-232
Ā4 x SMA antenna
Ā2 x USB 2.0 type A (5V/0.5A)
Ā1 x Line-out
Ā1 x DB15 (DIO)
- 4 x DI with isolation
- 4 x DO with isolation
- Vin, GND for GPIO
Ā1 x DB15 (MULTI PORT)
- 1 x RS422/RS485
- 1 x RS232 (TX/RX)
- 1 x CAN 2.0B
- 1 x 12VDC, 2A output (Vout, GND)
Power Management
ĀPower input 9~48 VDC
ĀSelectable boot-up & shut-down voltage for low power protection by software
ĀSetting 8-level power on/off delay time by software
ĀSupport S3/S4 suspend mode
Ā10~255 seconds WDT support, setup by software
ĀSDK (Windows/Linux) including utility and sample code
Operating System
ĀDebian Linux and other variants
Dimensions
Ā260mm (W) x 196mm (D) x 66.5mm (H)
Weight
Ā3.2kg
Environment
ĀOperating temperatures: -20Ā°C~60Ā°C (w/ Google Edge TPU & industrial SSD) with air flow
ĀStorage temperatures: -40Ā°C to 80Ā°C
ĀRelative humidity: 10% to 90% (non-condensing)
ĀVibration (SSD)
- Operating: MIL-STD-810G, Method 514.6, Category 4, common
carrier US highway truck vibration exposure
- Storage: MIL-STD-810G, Method 514.6, Category 24, minimum
integrity test
ĀShock (SSD)
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional
shock=40g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash
hazard shock test=75g
Standards/Certifications
Ā CE
Ā FCC Class A
Ā E13 mark
